| Sr No. |
Properties |
Specification |
| |
|
IS 2046 - 1995 |
NEMALD3-1995 |
| 01 |
Thickness (mm) % |
+0.10 |
+0.12 |
| 02 |
Resistance to surface wear (Revolutions) |
350 (min) |
400 (min) |
| 03 |
Resistance to immersion in boiling water (%) |
|
|
| |
(A) Mass increase |
10% (Max) |
No effect |
| |
(B) Thickness increase |
11% (Max) |
No effect |
| 04 |
Resistance to dry heat at 1800c |
Slight change of gloss/colour visible at certain
angles |
No effect |
| 05 |
Dimensional stability |
0.6 (Max)MD |
0.6 (Max)MD |
| |
at deviated temperature (%) |
1.0 (Max)CMD |
1.0 (Max)CMD |
| 06 |
Dimensional stability |
|
|
| |
at 200c (%) |
0.4 (Max)MD |
0.4 (Max)MD |
| |
|
0.6 (Max)CMD |
0.6 (Max)CMD |
| 07 |
Resistance to impact by small diameter ball (N) |
> 20 |
> 20 |
| 08 |
Resistance to cracking |
Hairlines cracks only visible under 6x magnification |
No effect |
| 09 |
Resistance to scratching (N) |
> 2.0 |
> 2.0 |
| 10 |
Resistance to staining |
No visible change |
No effect |
| |
Group 1 & 2 |
slight change of gloss/colour |
No effect |
| |
Group 3 & 4 |
Only visible at certain viewing angles |
|
| 11 |
Resistance to colour change in xenon arc light |
Blue wool standard rating 6 |
Slight effect |
| 12 |
Resistance to colour change in enclosed carbon
arc light |
Blue wool standard rating 5 |
Slight effect |
| 13 |
Resistance to cigarette burns |
Moderate change of gloss and/or moderate brown
satin |
No effect |
| 14 |
Resistance to steam |
Slight change of gloss/colour only visible at
certain viewing angles |
No effect |
| Usage |
| |
0.50mm to 1.80mm for Decorative as aspect as
furniture item |
| |
| 2.00mm and above compact laminates mainly used
at Cabinet, partition ELECTRIC Board etc. |
| |
Atith Fiber has two different sizes in their production
:
(1) 1220 x 2440mm &
(2) 1300 x 2800mm |
| |
| 1220 x 2440mm can be made in Glossy, Matt &
Sude Finish for required thickness. |
| |
| Whereas 1300 x 2800mm can be made in Glossy finished
only. |
| |
| |
| Properties |
I. S. Standard Limits |
Our Product Performance |
| Nominal thickness |
1.5mm +/- 0.20mm |
1.5mm +/- 0.10mm |
| Straightness of edges
of rectangular finished panel |
For panels of length
0.6m and above within +/-0. 06Lmm |
Within +/- 0.04mm |
| Squareness of rectangular
finished panel |
3.0mm (Max) |
2.00mm |
| Resistance to dry heat
|
Test at 1800
C +/- for 20 Mins. |
Tested at 1800C+/-
for 25 Mins.No Surface Deterioration |
| Dimentional
Stability |
Change shall not be
greater than 0.20mm (machine direction)
0.30mm (Cross direction) |
Found to be within 0.15
to 0.20mm (machine direction) 0.25 to 0.30mm (Cross
direction) |
| Resistance to boiling
water |
Time specified 2 hours
+/- 5 Min. Increase in 10% thickness & weight |
Tested for 2 hours +/-
5mins. 4% increase in thickness 4%increase in Weight |
| Cross Breaking
Strength |
- With decorative
face in tension 850kgf / cm 2
- With decorative
face in compression 1200kgf / cm 2
|
1000 kgf
/ cm 2
1400 kgf/cm 2 |
| Impact strength |
Not less than 0.035
kgf.m. |
0.045 kgf .m. |
| Machining Properties |
Good |
Excellent |
| Resistance to Steam
|
Not Worse than grade
4 |
No visible change |
| Resistance to spread
of flame |
50 Seconds |
10 to 30 Seconds |
| ( Requirement of buyers) |
|
|
| Stain Resistance
|
- Artificial Perspiration
- Blood - Human
- Citric Acid
Solution
- Coffee
- Cooking Fat
- Disinfectant
Fluids
- Gasoline
- Ink
- Rectified Spirit
- Kerosene
- Milk or Lassi
(Butter Milk)
- Sodium hydroxide
solution.
|
No Blistering,
Discolouration |
| Resistance to surface wear |
- 350 revolutions(of standard piece)for print
paper
- 400 revolutions for plain colours
|
- 400 revolutions observed for print paper
- 450 revolutions for plain colours
|
| The above values given
are on the basis of the exhaustive tests performed
in our laboratory and these are given for our
customers guidance. These are not to be taken
as certified values.
Our product meets all mandatory
requirements as specified in Indian Standard IS
: 2046 / 1995. |
